Full System Pressure Test
We isolate the water main, irrigation, and any pool loop, then pressurize each with a pressure testing gauge. A drop in pressure tells us which system is leaking before we scan, saving time and narrowing the search.
Licensed
Licensed & Bonded
Fully Insured
Insured & Bonded
24/7 Emergency
Same-Day Response
Warranty Backed
Workmanship Guaranteed in santa ana
What our non invasive leak detection includes
Every inspection includes a full diagnostic workup on the systems you are worried about. We tell you upfront what is covered, and if a repair needs a permit or a separate trade, we explain that before we start.
Acoustic and Thermal Scan
We walk the property with an acoustic listening disc and a FLIR thermal imaging infrared camera. The disc hears escaping water; the camera shows temperature shadows. Together they narrow the leak to a few inches.
Moisture Mapping Report
A moisture meter and soil probe chart how far water has spread behind walls or under the slab. You get a marked-up summary that guides drying and shows your insurance adjuster exactly what was affected.
Marked Leak Location
We tape and mark the spot on your floor or wall, then walk you through the reading. You will know the depth, the pipe material, and what a repair involves before you approve anything.
Repair Options and Pricing
Once we locate the leak, we give you a flat price for the repair, whether that is a pipe repair clamp, a section replacement, or epoxy pipe lining. If a City of Santa Ana permit is needed, we handle it.
Post-Repair Verification
After the fix, we re-pressurize the line and confirm with a hydrostatic test kit that the leak is gone. We do not leave until the gauge holds steady and the area is dry.
What Non-Invasive Leak Detection in santa ana actually involves
Non-Invasive Leak Detection in santa ana is a diagnostic plumbing service that pinpoints hidden water leaks using acoustic, thermal, and pressure-testing equipment instead of demolition. We start by isolating the affected system, then listen for the distinct frequency of pressurized water escaping a pipe. A thermal imaging infrared camera reveals temperature differences behind walls and under slabs, while a moisture meter confirms the spread of saturation. Once we have a location within a few inches, we mark it and explain your repair options.
Santa Ana homes deal with a specific set of leak triggers. Much of the housing stock was built before 1980, so corroded copper pipes and aging galvanized lines are common. The region's hard water accelerates pinhole leaks, and the clay-heavy soil in older neighborhoods shifts with seasonal moisture, stressing underground water mains and irrigation drip tubing. If you have been searching for non invasive leak detection near me Santa Ana CA, we can usually schedule a visit the same day you call.
How our leak detection process works
Every job follows the same five steps. You will know what we are doing, what we find, and what it costs before any repair begins.
01
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
02
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
03
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
04
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Tools and methods we use
Tools & Equipment
Acoustic Listening Disc
Picks up the sound of pressurized water escaping a pipe. We use it on water mains, slab lines, and pool loops to narrow the leak to a few inches.
FLIR Thermal Imaging Infrared Camera
Shows temperature differences behind walls and under slabs caused by escaping water. It works through tile, drywall, and concrete without demolition.
Electronic Leak Detection Wand
Confirms leaks in hard-to-reach areas and along gas lines. We pair it with a tracer gas detector when a line is buried or concealed.
Pressure Testing Gauge
Isolates and pressurizes each system to confirm which line is losing pressure. This step prevents us from scanning the wrong pipe.
RIDGID Pipeline Inspection Camera
Inspects drain and sewer lines for cracked joints, root intrusion, and blockages. It pairs with our drain leak detection work.
Moisture Meter and Soil Probe
Charts how far water has spread behind walls or under the slab. The readings guide drying and tell you what materials need replacement.
Hydrostatic Test Kit
Verifies the repair after we finish. We re-pressurize the line and confirm the gauge holds steady before we close up the area.
Methods & Standards
Acoustic and Thermal Cross-Check
We never rely on one reading. The acoustic disc tells us where the sound is loudest; the thermal camera shows where the temperature shifts. When both point to the same spot, we mark it and confirm with a moisture meter.
Zone Isolation and Pressure Testing
We shut off fixtures and isolate the water main, irrigation, and pool loop, then pressurize each with a pressure testing gauge. A drop in pressure tells us which system is leaking before we scan, which saves time and keeps the inspection focused.
Tracer Gas Detection
For lines buried under concrete or in hard-to-reach areas, we introduce a safe tracer gas and use a detector to find where it escapes. This is common on underground water mains and gas lines where acoustic readings are faint.
California Plumbing Code Compliance
Every repair we make follows the California Plumbing Code and Uniform Plumbing Code. When a repair requires a City of Santa Ana building permit, we pull it and schedule the inspection so your work is documented and compliant.
When to call for non invasive leak detection
01
You got a letter from the city about unusually high water use at your santa ana address.
What we do: We isolate the main and irrigation zones, pressure-test each, and use acoustic gear to find the loss. Most high-use notices trace back to a running toilet, a slab leak, or a broken irrigation line.
→ You get a confirmed location and a repair plan, often the same day, so the next billing cycle returns to normal.
02
Your pool level drops overnight and the pump keeps losing prime.
What we do: We pressure-test the pool loop and use acoustic listening plus dye testing to isolate the break. If the leak is in the return line, we mark it and repair with a targeted dig or epoxy pipe lining.
→ The pool holds level, the pump runs without cavitation, and you stop adding water every week.
03
You hear water running at 2 a.m. when every fixture is off.
What we do: We respond 24/7, shut off the main if needed, and run a pressure test to confirm the loss. Acoustic and thermal tools then narrow the leak to a few inches so the repair stays small.
→ The water stops, the damage is contained, and you have a marked location for repair before the next morning.
04
You are buying a pre-1980 santa ana home and want a leak check before closing.
What we do: We run a full non-invasive scan on the water main, slab, and irrigation, and check for corroded copper pipes and failing fittings. You get a written summary of what we found.
→ You negotiate from facts instead of guessing, and you know what repairs to budget for after closing.
How leak detection runs in santa ana
Santa Ana sits on a mix of older slab-on-grade homes and mid-century commercial buildings, and that building stock shapes how we work. In neighborhoods like Floral Park and French Park, we often find corroded copper pipes and original galvanized lines that have been patched over the decades. The hard water here accelerates pinhole leaks, and the clay-heavy soil shifts with seasonal moisture, which stresses underground water mains and irrigation drip tubing. Summer heat pushes irrigation systems to run longer, so we see a spike in sprinkler and drip-line failures from June through September. Winter rain saturates the ground and can expose a slab leak that was slow all year. We work to California Plumbing Code and pull City of Santa Ana permits when a repair requires one. If you need non invasive water leak detection Santa Ana California, we bring the same acoustic and thermal gear to a 1920s bungalow in Lacy as we do to a South Coast Metro office building.
Neighborhoods We Serve
-
Floral Park
Historic homes with original galvanized and early copper lines. We see pinhole leaks and failing fittings more often here than in newer tracts.
-
South Coast Metro
Commercial and high-rise residential buildings where we work after hours to avoid disrupting tenants and businesses.
-
Washington Square
Slab-on-grade homes from the 1950s and 1960s. Slab leaks under tile and hardwood are common, so thermal imaging is our first tool.
-
Artesia Pilar
Larger lots with mature landscaping and irrigation systems. Drip-line and sprinkler leaks show up as soggy patches and high water bills.
Local Conditions We Plan For
-
Hard water that accelerates pinhole leaks
Minerals in the water eat through copper pipe from the inside. We see leaks on hot-water lines first, often within 10 to 15 years of installation.
-
Clay-heavy soil that shifts seasonally
Movement stresses underground water mains and irrigation lines. Leaks often appear after a wet winter or a dry summer, and they can be hard to hear without acoustic gear.
-
Pre-1980 housing stock with mixed pipe materials
We regularly find copper, galvanized, and CPVC pipe in the same home. Knowing the material helps us choose the right repair, from a pipe repair clamp to a full section replacement.
-
Long irrigation seasons from June through September
Sprinkler and drip systems run more hours, so valves and risers fail faster. We pressure-test each zone to find the break without digging up the yard.
Slab leak under hallway tile
Leak problems we solve without breaking walls
Most leaks announce themselves through a bill, a sound, or a stain. Here are the ones we find most often in santa ana, and what happens if they are left alone.
Problem
Water bill doubled with no visible leak
A hidden supply-line leak can waste 10,000 gallons a month and eventually undermine a slab or foundation.
Our Fix
We isolate the main, pressure-test it, and use acoustic and thermal gear to find the break. Most are located within an hour, and we repair the section the same day with copper or PEX tubing.
Problem
Hot spot on the floor or warm tile
A slab leak under a hot-water line heats the floor and can crack tile, warp hardwood, and feed mold growth.
Our Fix
We use thermal imaging and acoustic listening to pinpoint the line under the concrete. We open only the marked area, repair the copper pipe, and verify with a hydrostatic test kit before closing it up.
Problem
Pool losing an inch or more per day
A leaking pool loop wastes water, damages the pump, and can erode the deck and surrounding soil.
Our Fix
We pressure-test the return and suction lines, then use acoustic gear and dye testing to find the break. Repair often means a targeted excavation at the marked spot or epoxy pipe lining on the line.
Problem
Musty smell or stain on the ceiling
A slow drain or supply leak behind a wall creates moisture and mold growth that spreads fast in santa ana's warm months.
Our Fix
We run a drain camera and moisture meter to find the source, then confirm with thermal imaging. Once located, we repair the ABS pipe or PVC pipe section and map the moisture so you know what to dry.
Why homeowners choose non destructive leak detection
Digging up a slab or opening a wall to find a leak is expensive, messy, and often unnecessary. Here is what you gain when we locate the problem first.
-
No Demolition Required
We pinpoint leaks with acoustic listening discs and thermal imaging infrared cameras, so your tile, hardwood, and drywall stay intact. Most inspections finish in 60 to 90 minutes, and you get a marked location you can act on immediately.
-
Lower Repair Costs
Finding the leak before anyone cuts concrete means your plumber opens one small area instead of guessing. Customers routinely save hundreds on concrete cutting, patching, and flooring replacement because the repair is targeted to a few square feet.
-
Fast Answers, Same Day
When your water bill doubles or you hear water running at 2 a.m., waiting is not an option. We carry electronic leak detection wands and pressure testing gauges on every truck, so most santa ana calls get a confirmed diagnosis the same day.
-
Protects Your Foundation
An undetected slab leak can undermine a foundation, cause cracks, and feed mold growth. Catching it early with non invasive slab leak detection Santa Ana CA keeps the repair small and protects the structural integrity of your home.
Licensed, bonded, and accountable
Licensed & Certified
- California C-36 Plumbing Contractor License — issued by California State License Board (CSLB)
- IAPMO Certification — issued by International Association of Plumbing and Mechanical Officials
- ASSE Standards Compliance — issued by American Society of Sanitary Engineering
- Backflow Tester Certification — issued by Orange County Water District approved program
- OSHA Safety Compliance — issued by Occupational Safety and Health Administration
Verified Reviews
Google ★★★★★4.9
They found a slab leak under our kitchen tile in about an hour using a thermal camera. Marked the spot, explained the repair, and had it fixed the next day. Only opened a small section. Fair price and no pressure.
Yelp ★★★★★4.8
Called about a high water bill and a running sound at night. The technician pressure-tested the main and found a pinhole leak under the lawn. Repaired it the same visit. Bill went back to normal the next month.
BBB ★★★★★4.9
Professional and clean. They used acoustic gear to find a pool line leak that two other companies missed. Showed us the reading and the marked spot before digging. Would call again.
Google ★★★★★5.0
After-hours call for a burst pipe. They answered, dispatched a licensed tech, and had the water stopped within the hour. Explained the repair and gave a flat price before starting. No surprises.
Leak detection expertise you can verify
Our technicians hold a California C-36 Plumbing Contractor License and work to California Plumbing Code and Uniform Plumbing Code standards on every job. We train on RIDGID pipeline inspection cameras, Fluke acoustic equipment, and FLIR thermal cameras, and we keep current with IAPMO certification requirements. That matters in Santa Ana, where pre-1980 copper and galvanized systems behave differently than newer PEX tubing. We have located leaks in slab-on-grade homes, commercial kitchens, and pool plumbing across Orange County, and we bring that pattern recognition to every call.
- State-licensed plumbing contractor under the CSLB, bonded and insured for residential and commercial work.
- Certified in acoustic and thermal leak detection methods with ongoing manufacturer training.
- Experienced with copper pipe, PEX tubing, CPVC pipe, and legacy galvanized systems.
- Equipped with RIDGID, Fluke, Milwaukee Tool, and FLIR diagnostic gear on every truck.
- Trained on California Plumbing Code and City of Santa Ana building permit requirements.
Frequently Asked Questions
Real answers to the questions we hear most often from local homeowners and property managers.
How much does non invasive leak detection cost in Santa Ana CA?
Most residential inspections run $180 to $450 in 2026, depending on how many systems we test. A single water line check sits at the low end; a full slab, pool, and irrigation scan sits at the high end. The fee covers the technician, equipment, and a marked location. If you approve the repair, we credit a portion of the inspection toward the work.
Can you detect a leak without cutting into walls or floors?
Yes. We use acoustic listening discs, thermal imaging infrared cameras, and tracer gas detectors to find leaks from the surface. In most santa ana homes we pinpoint the leak within a few inches without opening anything. If a repair is needed, we open only the small area we already identified, not a random trench.
Is non invasive leak detection as accurate as digging?
It is accurate to within a few inches on pressurized lines, which is why we use it first. Acoustic and thermal readings are cross-checked with a moisture meter and pressure testing gauge before we mark a spot. Digging confirms what we already found; it does not find the leak better.
Do you repair the leak after non invasive detection in California?
Yes. We handle leak detection and repair in santa ana California, from pinhole leaks on copper pipe to slab leaks under tile. After the repair we re-pressurize the line and verify with a hydrostatic test kit. If the fix needs a permit, we pull it through the City of Santa Ana.
Related Services
Leak Detection
Our core service covers water, slab, pool, and underground lines across santa ana. We start every job with Non-Invasive Leak Detection in santa ana methods, then move to targeted repair once we know exactly where the loss is.
View Leak DetectionWater Leak Detection
A rising water bill with no visible puddle usually means a supply-line leak. We isolate the main, pressure-test it, and use acoustic gear to find the break. This pairs directly with Non-Invasive Leak Detection in santa ana for homes on older copper or galvanized pipe.
View Water Leak DetectionSlab Leak Detection
Hot spots on the floor and a spinning water meter point to a slab leak. We use thermal imaging and acoustic listening to locate it under the concrete, then open only the marked area. Non invasive slab leak detection Santa Ana CA keeps your flooring damage to a minimum.
View Slab Leak DetectionPool Leak Detection
A pool losing an inch or more a day is usually leaking at the shell, skimmer, or plumbing. We pressure-test the pool loop and use dye testing plus acoustic gear to isolate it. This is a common add-on to Non-Invasive Leak Detection in santa ana for South Coast Metro properties.
View Pool Leak DetectionSewer Line Leak Detection
Sewer leaks show up as soggy patches, odors, or repeated backups. We run a pipeline inspection camera to find root intrusion and cracked joints. When a sewer leak is suspected, we pair camera work with Non-Invasive Leak Detection in santa ana to rule out a supply-side issue.
View Sewer Line Leak DetectionGas Leak Detection
A gas smell or hissing near a meter or appliance needs immediate attention. We use a tracer gas detector and electronic leak detection wand to find the source, then isolate and repair the line. Safety-first response, available around the clock in santa ana.
View Gas Leak DetectionContact Planet Plumbing
Call us at 714-844-9877 or email [email protected]. We answer the phone 24/7 for emergencies and schedule same-day appointments for most leak detection calls in Santa Ana. Our office is at 1234 W 1st St, Santa Ana, CA 92703. We look forward to helping you.
Planet Plumbing
-
Phone
7148449877 -
Address
1240 S Wright St, Santa Ana, CA 92705
-
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available